Intake Removal/Install Day 2

I continued removing the old intake. Was fairly straight forward. disconnected the fuel lines, drained the coolant. 11 bolts later it was out.

Fuel Lines Removed

Thermostat Housing Removed and Intake Bolts Removed

Intake Removed

Driver Side Intake

 

Leaked Coolant

Passenger Side Intake

Coolant Passages Look Good

 

All the Intakes Looked Good

This was the Passenger Side Coolant Cross Over - Notice the O-Ring is Damaged

This was the Driver Side Coolant Cross Over - Notice the O-Ring is Cracked and Bulging Out

Old Intake

New Intake

New Intake Installed

Need to add Coolant, Replace one Heater Hose, and Re-Install the Spark Plug Wires.

More Tomorrow as I ran out of time tonight...